HEPAIL

1. Multiple ventilation holes design, no more fogging troubles2. Buckle design, quick disassembly and assembly3. No obstruction on the edge of the lens, no black edges on the spliced ??images4. Thickened and reinforced buckles to tightly protect the lens5. High-toughness materials are used to...

1. Battery capacity: 450mAh2. Charging port: Type-C3. Charging time: about 90min4. CRI: 95+5. Material: ABS, PC6. Size: about 7.2 x 6 x 2.15cm7. Weight: about 60g8. Note: only fill light, no other featuresFeatures:1. Curved lampshade design, bright and soft light2. Small and convenient, carry...

1. Battery capacity: 450mAh2. Charging port: Type-C3. Charging time: about 90min4. CRI: 95+5. Material: ABS, PC6. Size: about 7.2 x 6 x 2.15cm7. Weight: about 60g8. Note: only fill light, no other featuresFeatures:1. Curved lampshade design, bright and soft light2. Small and convenient, carry...

1. Switch between horizontal and vertical shooting at will, and can be quickly removed for easy viewing2. It can also be used alone, and can be turned into a magnetic bracket in seconds, adsorbing various iron surfaces to unlock more viewing angles3. Magnetic +...

1. With silicone lens cover, it does not wear the lens and protects the camera2. Hollow design on both sides does not block the holes3. The cold shoe interface on the side can easily connect accessories such as fill lights and microphones4. The bottom...

1. With silicone lens cover, the internal design reserves space to avoid empty lens. The lens cover does not rub against the lens during disassembly and assembly, effectively preventing sand and stones from scratching the lens2. Hollow design on both sides, no obstruction, removable...

1. The knob closure makes disassembly and assembly convenient and firm2. The hollow design on both sides does not block and does not affect the use3. With silicone lens protective cover, the internal large space design avoids the empty lens and lens protective lens,...

1. Made of high-strength plastic composite material, light and strong2. Magnetic suction and fixed claws lock the camera, no fear of shaking, stable and firm3. Use rubber rings to enhance screw damping, riding screws will not loosen, no need to worry about the camera...

1. With cold shoe expansion interface, can be connected to the microphone, fill light, etc., expand more accessories2. 1/4 screw holes at the bottom, can be used with a tripod together3. Compatible with threaded/continuous handle4. Two cell phone fixing methods, can be switched freely5....

1. With double two-jaw interface, easy to expand, suitable for backpack clip, magnetic neck brace, tripod, car suction cup bracket, bicycle vigorously clip, extension pole, etc.2. Precise molding, fit the body, precise hole position, safety protection, easy to disassemble3. With cold shoe port, can...

1. Double-sided quick-release air-avoiding lock design, speed up shooting without obstruction, no need to disassemble the machine, quick battery replacement2. High-strength aluminum alloy frame structure, built-in shock-absorbing soft rubber3. Stable and non-shaky, light and convenient4. Rotating support, various interfaces5. Material: aluminum alloy6. Size: about...

1. Rich external holes, with 1/4 inch Arri positioning hole, cold shoe interface, Action quick release interface, etc.2. Physical snap-on locking of the camera, efficient and safe3. Side-flip opening and closing design, easy to remove4. Hollow bottom, can be directly connected to the Action...

1. Strong magnetic attraction, quick disassembly and assembly, compact and portable, strong and shockproof2. Two-claw adapter to expand more scenarios3. The shockproof silicone sheet has a raised reinforcement strip design on both sides to further enhance the firmness of the installation4. The surface silicone...

1. Suitable for DJI Osmo Mobile 6 / Mobile SE / OM 5 / OM 4 SE / OM 4 stabilizers, devices with 1/4 expansion screws2. Strong magnetic force adsorbed on mobile phones or mobile phone cases with magsafe3. Hollow weight reduction design, no...