5V 3Pin To SATA Power Motherboard RGB Lighting Controller Cable For Chassis Fan

1. Conductor material: tinned copper
2. Interface: SATA 15PIN/ARGB 5V 3PIN
3. It can be directly connected to the 5V3PIN interface light-emitting device, through the controller to control the light effect
4. The speed and brightness of the light effect can be independently adjusted, a key to manually switch the light effect, convenient and quick
5. Through the Y-type adapter cable (not included) can be extended to a number of devices, the remote control volume is small, easy to route and hide in the chassis
6. Product function: connected to the power supply SATA power supply, and can be controlled through the controller ARGB device light effect, the speed and brightness of the light effect is freely adjustable, does not require the motherboard has an ARGB interface
7. Weight: about 16 g
8. Size: length of about 70 cm


Key functions:
1. M key click switch mode: click to switch to the next mode, cycle switching controller mode
2. S key click to adjust the speed: click to switch to the next speed, divided into 6 gear incremental cycle speed gears
3. S key long press switch light: this key 3 seconds to turn off the light, and then long press this key 3 seconds to turn on the light
4. C key click to switch color: click in the same mode cycle switch color
5. C key long press to adjust the brightness: long press this key for 3 seconds, the height of the light 6 grades decreasing cycle of adjustment