In Car, Game & Toys-Replacement Parts-Engine Fittings

1. Change the motors of different diameter shafts.2. Change belt pulleys with different speeds and reduce the purchase of new motors or pulleys to maintain existing components and speed/power requirements.3. Adapt the larger wheel hole to the small shaft and work with the pneumatic...

1. Durable and reliable. 2. Easy to install.. 3. Original standard, a great replacement for old or broken one. 4. OE number: 12596951/12621234/12673134/1S10874/2133411/8125969510/8126212340/8126731340/PS690/PS711. This is just for reference, please check and confirm the OE carefully before purchasing. 5. Fit for: For BUICK>ALLURE>2009 For BUICK>LACROSSE>2009-2019...

1. Durable and reliable. 2. Product function: improve the car idle speed. 3. OE: L32118740A/L32118740B/L32118740C/Z50418740/Z50418741/Z50418741. This is just for reference. Please confirm the OE number before purchasing. 4. Material: plastic + metal 5. Fits for: For MAZDA 6 2003-2004 For MAZDA MPV 2000-2001 For...

1. Prevents fuel from returning back to the tank and keeps it in the line. 2. Fit for Carburettor and low pressure fuel systems. 3. Easy installation and replacement. 4. Material: Aluminum 5. Color: Silver 6. Size: 8mmSpecification: Package Weight One Package Weight 0.05kgs...

1. Prevents fuel from returning back to the tank and keeps it in the line. 2. Fit for Carburettor and low pressure fuel systems. 3. Easy installation and replacement. 4. Material: Aluminum 5. Color: Silver 6. Size: 6mmSpecification: Package Weight One Package Weight 0.05kgs...

1. Protect your performance cam with precision machined broned gears. 2. Bronze gears are recommended for steel billet mechanical roller tappet cams and slot hard-faced steel billet mechanical flat tappet cams. 3. Bronze gears absorb the increased wear in special cams and magnetos and...

1. Material: copper clad aluminum 2. Suitable for Toyota / Nissan / Mazda 2. Voltage: 12V 3. Current: 1.0-1.3A 4. Pressure: 0.03MPA-0.04MPA 5. Flow: 110L/H 6. OE: EP-500-0, 035000-0460, 12585-52030, 12585-52031, 1258552031, FP7901-017, 100FP17R430, 8118-13-350ASpecification: Package Weight One Package Weight 0.38kgs / 0.84lb One...

1. The internal pin is connected with the upper knob to realize the adjustable function. When in use, CCW switch the knob to close the R1234YF coupler, fasten it to the AC service port, then CW switch the knob to lift the internal pin...

1. Prevent fuel from returning to tank and keep it in line. 2. Suitable for carburetor and low pressure fuel system. 3. Easy to install and replace. 4. OE: 058905291K 5. Applicable models: For 2001-2001 AUDI A4 AVANT CONFORT WAGON 4-DOOR For 2001-2001 AUDI...

1. Plug and play, no need to cut. 2. For ZF6HP26/6R60/09E transmissions. 3. High quality materials, long service life. 4. Light weight, good temperature stability. 5. OE: 24347588759 24107536339 2410753634024107536341. Please check it clearly, confirm suited to your needs. 6. Fits for BMW E60...

1. It will allow you to install oil coolers, sensors, or sending units without the need to relocate or drill unnecessary holes in your engine block. 2. Double O ring installation for a seamless and tight connection. 3. Equipped with Oil temperature & oil...

1. Durable and reliable. 2. Easy to install. 3. It can be installed in the upper water pipe of the cooling water tank. 4. Applicable models: BMW335i, 335xi, 135i and N53 (3.0 liter non-turbo) / 2006-2010 325i, 330i, 525i, 525xi, 528i, 528xi, 530i, /...

1. Helps to achieve perfect spark plug clearance. 2. High quality material with CNC machining, solid and durable for long term use. 3. Easy and convenient to use. 4. Compact and light weight, easy to carry and store. 5. Material: aluminum 6. Size: 14mmSpecification:...

1. Made of steel material, durable. 2. Specially designed for flywheel fixing of transmission before the engine dismantling. 3. Fits for BMW N20(old), N26(old), N55 engine. 4. Material: steel 5. Size: 35x23mmSpecification: General Compatible with BMW: X1, X3(F25), Z4(G29) Package Weight One Package Weight 0.07kgs...

1. Made of metal, which is durable. 2. Compresses valve springs with the head on the bench or on the engine in the car. 3. Allows easy replacement of valve stem seals, valves, springs, and retainers. 4. Will not slip or damage head like...

1. Material: aluminum 2. Applicable models: General models 3. Accelerate the heat dissipation in the water tank, pressurize to eliminate air bubbles in the water 4. Good quality and long service life 5. Easy to install 6. Capacity: 800ML Specification: Package Weight One Package...

1. Material: aluminum alloy, silicone 2. Applicable models: suitable for BMW crude oil engines 3. Durable and light weight 4. Easy to install, directly replace the old one 5. Size: 22mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm *...

1. Durable and reliable. 2. Easy to install. 3. Come with 4 pieces coilover (two front, two rear),o-ring spacers and hardware for easy installing. 4. Fits for Honda Civic EG EK. 5. Material: metalSpecification: General Compatible with Honda: Civic Package Weight One Package Weight 7.04kgs...

1. All parts are hand inspected off the line before packaging and once again by our team before shipment. 2. According to the original factory specifications. 3. Easy installation. 4. Stable characteristics, high reliability. 5. OE: SA-3725-12, 30A87-20402, 30A8720402, 30A87 20402, 30A87-00040, 30A8700040, 30A87...

1. Advanced CNC machined aircraft grade billet aluminum with red anodized finish, durability, anti-corrosion and never rust. 2. High precision and hardness to provide a much longer service life. 3. Helps to keep water, dust, mud and debris out of your front model 30/44...

1. Made of plastic, aluminium and copper, which is durable. 2. Easy to use and install. 3. OE number: 84306-0K050 / 84306-0K051 / 84306-02200. This is just for reference, please check and confirm the OE carefully before purchasing. 4. Fits for Toyota: Corolla 2007-2014...

1. Durable and reliable. 2. Easy to install. 3. It can be installed in the upper water pipe of the cooling water tank. 4. Applicable models: for BMW 2006 - 2010 325i, 330i, 525i, 525xi, 528i, 528xi, 530i, 530xi and N20. 5. Material: aluminum...

1. It has good ductility, electrical conductivity and thermal conductivity, and has strong ferromagnetism. 2. Copper is used in the manufacture of various cables and wires, motors and transformers, switches and printed circuit boards with good electrical conductivity. 3. It will provide powerful power,...

1. It has good ductility, electrical conductivity and thermal conductivity, and has strong ferromagnetism. 2. Copper is used in the manufacture of various cables and wires, motors and transformers, switches and printed circuit boards with good electrical conductivity. 3. It will provide powerful power,...

1. Durable and reliable. 2. Easy to install. 3. It can be installed in the upper water pipe of the cooling water tank. 4. Provides an accurate mounting location for the water temperature sensor. 5. Made of aluminum alloy, it has good heat transfer...

1. Best Protector - This turbo timer will well protect your turbo, which will allow the turbo to quickly cool down after driving. 2. Improving Efficiency - Well improving the ignition energy, this turbo timer will prevent the spark plug from unusual jumping, which...

1. Safe design to protects against injury and refrigerant loss. 2. Offer you the best convenience to attach the manifold hoses onto the car. 3. Easy to install and use. 4. Material: copper 5. Blue: low voltage; Red: high voltageSpecification: Package Weight One Package...

1. The role of the valve is to prevent engine oil being sucked from crankcase when the engine is at low speed and small load and the intake pipe vacuum is too high. 2. Durable and lightweight. 3. Easy to install. 4. Material: plastic...

1. Dual valve design, sequential system.the HKS super sequential blow-off (SSQV)is a dual stage pull-type relief valve, which will not leak under any level of boost. 2. This ensures a quick valve response and complete closure idle. 3. Pull-type blow off valves will work...

1. Brand new and high quality 2. Bear the oil 3. Watertightness and defend the ultraviolet ray 4. Bear the corrosion 5. Easy to install and use Contain: 1/8*1/4 20pcs 5/32*9/32 20pcs 3/16*5/16 20pcs 7/32*11/32 20pcs 1/4*3/8 20pcs 5/16*7/16 20pcs 3/8*1/2 15pcs 1/2*5/8 15pcs...

1. It has good ductility, electrical conductivity and thermal conductivity, and has strong ferromagnetism. 2. No troubles, no noise. 3. Accurate measurement of pressure for better performance. 4. OE number: 0580464038. This is just for reference. Please confirm the OE number before purchasing. 5....

1. Durable and reliable. 2. Corrosion resistance and does not fade. 3. Long-term service life. 4. Material: aluminum 5. Use: Modification of the turbo pressure relief valve to protect the turbine and engine.Specification: Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size...

1. Durable and reliable. 2. Resistance to UV, water and high temperature, with anti-aging properties. 2. Excellent electrical insulation. 3. Comes with 9 PCS in total, a directly replacement for the original hose. 4. Working temperature: -53.8~260 degree Celsius 5. Thickness: 4.5mm 6. Material:...

1. Durable and reliable. 2. Stable and high performance. 3. Clear fuel pressure reading. 4. Adjustable 0-140 PSI for maximum fuel pump capacity. 5. Material: aluminum alloySpecification: Package Weight One Package Weight 0.69kgs / 1.53lb One Package Size 13cm * 13cm * 12cm /...

1. Durable and reliable. 2. Easy to install. 3. Corrosion resistant, no fading. 4. Material: metal 5. Color: silverSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton...

1. The stock PCV on the TFSI engine is quite fragile and over time, or when running lots of boost, the diaphragm inside can rip which can result in excessive blowby entering the inlet manifold at idle (smoking from the tailpipe) or a loss...

1. To remove the swirl flaps you will need one piece per cylinder, so 6 per engine. 2. Swirl flap for replacement. 3. Material: Aluminum + Silicone 4. Durable and lightweight. 5. Suitable for: BMW 6. Size: 33mmSpecification: Package Weight One Package Weight 0.19kgs...

1. To remove the swirl flaps you will need one piece per cylinder, so 6 per engine. 2. Perfect swirl flap for replacement. 3. Material: Aluminum + Silicone 4. Durable and lightweight. 5. Suitable for: BMW 6. Size: 22mm Specification: General Compatible with BMW: 520d,...

1. Durable and reliable. 2. Easy to install. 3. Material: iron 4. Weight: 170g, size: 15.5 x 12.5cm 5. Suitable for universal car. Specification: Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 16cm * 13cm * 2cm / 6.3inch * 5.12inch...

1. Material: plastic + steel 2. Fits for: For Peugeot Boxer 2.2 HDI All BHP Variants 2006/04 For FIAT DUCATO (250)2006/07 For Nissan Cabstar 2003-2010 For Nissan Navara 2005-2015 For Nissan Pathfinder 2005-2015 3. OE number: 1460A037. This is just for reference, please check...

1. Durable and high performance. 2. Low noise. 3. Part number: GSS342 4. Flow: 255LPH; pressure: 0.8MP(mpa) 5. Suitable for most cars. 6. Size: 10*5.5cm; material: aluminum alloySpecification: Package Weight One Package Weight 0.46kgs / 1.02lb One Package Size 16cm * 10cm * 9cm...

1. Made of plastic, lightweight and durable to use. 2. Stable performance and high reliability. Fits your car. 3. Original standard, which is an old or broken replacement. 4. Easy to install and reliable to use. 5. OE: 25567-ET025. This is for reference only,...

1. Made of plastic, lightweight and durable to use. 2. Stable performance and high reliability. Fits your car. 3. Original standard, which is an old or broken replacement. 4. Easy to install and reliable to use. 5. OE: 84306-50190. This is for reference only,...

1. Made of plastic, lightweight and durable to use. 2. Stable performance and high reliability. Fits your car. 3. Original standard, which is an old or broken replacement. 4. Easy to install and reliable to use. 5. OE: 84306-52050. This is for reference only,...

1. Made of plastic, lightweight and durable to use. 2. Stable performance and high reliability. Fits your car. 3. Original standard, which is an old or broken replacement. 4. Easy to install and reliable to use. 5. OE: 93490-2B200. This is for reference only,...

1. Made of plastic, lightweight and durable to use. 2. Stable performance and high reliability. Fits your car. 3. Original standard, which is an old or broken replacement. 4. Easy to install and reliable to use. 5. OE: 93490-2M300. This is for reference only,...

1. Made of plastic, lightweight and durable to use. 2. Stable performance and high reliability. Fits your car. 3. Original standard, which is an old or broken replacement. 4. Easy to install and reliable to use. 5. OE: 93490-3R110. This is for reference only,...

Feature1. Made of plastic, lightweight and durable to use. 2. Stable performance and high reliability. Fits your car. 3. Original standard, which is an old or broken replacement. 4. Easy to install and reliable to use. 5. OE: 93490-3V110, 93490-3S110. This is for reference...

1. High-quality metal, strong, corrosion-resistant and durable. 2. The installation is simple, no complicated tools are required, and it is easy to use. 3. Original standard, old or bad ones are directly replaced. 4. Replace the OEM number for reference: 2280007220 5. For Land...

1. Scope of application: universally applicable to all exhaust/turbine/intercooler/intake pipe connections 2. The thickness may vary: about 1.05 mm 3. Material: stainless steel 201 4. Durable and non-fading 5. Size: 51x76x131mmSpecification: Package Weight One Package Weight 1.01kgs / 2.22lb One Package Size 15cm *...